Removing a Microsoft account from a computer: how and why to do it. Removing a Microsoft account from a computer: how and why to do it Removing a Windows 10 account

Often, after installing Windows 10, many users encounter a problem when they need to delete Windows 10 accounts, either because they are not used, or due to the inconvenience of logging into the system. The root cause, in fact, is not particularly important. Let's look at the simplest options for actions that allow you to delete in Windows 10. This is done quite simply and literally within a few minutes to “account” for any type and priority.

What is a Microsoft account needed for?

Let's start a little from afar. Why do you need an activated Microsoft account? Yes, only because without its creation the system simply will not be installed on a computer, laptop or mobile device. In addition, it is these registration data that will subsequently be used to log in to the system with administrator rights.

Not everyone, however, knows that even in the “seven” there was a certain additional priority account of the so-called super administrator, on whose behalf it is sometimes necessary to run programs or installation processes for specific software that require making changes to system files, even though the user has all the necessary rights. We'll dwell on this a little later.

As for the Microsoft “account”, very often there is a situation where the login password is very long or complex, and entering it constantly becomes a real problem, especially when it contains an almost unmemorable combination of characters, letters or symbols.

Local accounts

With local accounts the situation is much simpler. As a rule, they are created on terminals if several users are expected to work in the system. But the “ten” is such that it itself initially creates several “accounts”, which, in general, hang in the system as a dead weight.

In principle, for normal login and operation it is enough to leave one (current) local account and delete Windows 10 accounts of any other type. How to do this will now be discussed.

Switching from a Microsoft account to a local account

Before deciding how to delete an account on Windows 10 (meaning a Microsoft “account”), you should first rebuild your login parameters, that is, set the access condition not using a “Microsoft” registration, but a local account.

In general, the process of deactivating an “account” and changing its settings boils down to logging out of one account and logging in under another. To do this, we use the standard “Start” menu, where you just need to click on the user name and select change settings from the drop-down menu account. In the settings window we are interested in the email and “accounts” section. In the window on the right there is an additional login line under local registration. Click on it and go to the next menu.

Here you will have to enter your current password, and then enter new login information. In principle, if the password will not be used in the future, the corresponding field can be left empty. Next, we simply confirm logging out and shutting down. At this stage, this can be limited. The next time you boot, the system will use local registration. Let's stop there for now.

How to remove unnecessary Windows 10 accounts: method one

Now let's look at the issues related to removing unnecessary data. There are two ways to do this. The first method to understand on Windows 10 is to use the same partition that was mentioned above.

Only in this case, you should use the “Family and other users” menu to carry out the deletion process. In the window on the right, select the entry to be deleted and the corresponding action.

Please note: after this, the system will issue a warning that all settings and files saved by this user in the corresponding section will be deleted. If some information should remain, it is better to first cancel the process, then move or copy them to another location on the disk and repeat the operation again. At the stage of deleting files, we agree, after which all registration data from the system will be deleted.

How to delete a local Windows 10 account using method two

Let's consider the second one, no less effective way. When you need to decide how to completely remove a Windows 10 account, you can use classic method access to user accounts through the standard "Control Panel".

First, you need to log in with administrator rights, select the accounts section in the “Control Panel” and go to the control point for another account. As in the previous option, select the entry that needs to be deleted and activate the process.

Again, the system will prompt you to delete or save user information (files). Depending on your needs, we choose what you need. By the way, this method is good because Windows initially offers to save files created under the “account” being deleted, rather than canceling the process and first copying or moving them to another location, as in the previous case. However, this does not in any way affect the process of deleting registration data and parameters.

Deactivate your Microsoft account

Now let's move on to the most important thing. It seems that the Microsoft account on the computer is deactivated. In fact, she hasn't gone anywhere. To completely delete Windows 10 accounts (in the sense of “Microsoft” ones), they need to be deactivated (closed) on the corporation’s official resource. Please note that if you choose not to use it, some online services will become unavailable.

To close registration, you need to go to the login page and enter the data originally specified during registration. Then we use the privacy and security section. At the bottom of the page there is a section to close your account, when you log in, a corresponding button will be displayed. Click it, select the reason for closing, and then mark the entry for closing.

Separately, it is worth paying attention to the fact that the “account” will not be closed immediately, but only after 60 days from the moment the process is activated. Moreover, if the user has a linked device, for example mobile phone, a special code will be sent to it, which during this period can be used to restore registration. But whether it’s worth doing such things, everyone decides for themselves. Of course, if the built-in “tens” services or the declared extended support are not used, as well as access to the online store, there will be nothing wrong with the user refusing such registration. As mentioned above, this will not affect the performance of the system, except that some services will stop functioning. In some cases, there may be problems with saving contacts, say, in Outlook.

In addition, if the user already had invoices for payment for the store’s services, he should either pay them or send a cancellation request.

Problems with user files

How to delete Windows 10 accounts is, in general, already clear. As for storing information, in principle, you can do two things. For example, you can initially move the files to another location on the disk or logical partition, or copy them to removable media. However, the method of deleting an “account” from the “Control Panel” in this sense seems more preferable, since the system itself will remind the user of the need to save important data. However, what to do depends on the user himself.

Conclusion

In conclusion, it is worth saying that only the most basic and simplest methods for deleting Windows 10 accounts of any type were discussed here. As you can see, the technique is quite simple both for local computers and for the Microsoft online service, where you can get rid of registration once and for all. The only question here is whether it is advisable to delete the “Microsoft” registration, because then some services will become unavailable. However, it is still possible to restore the recording within 60 days. The main thing is not to miss the moment of expiration of this period.

Windows 10 OS is a multi-user operating system. This means that several accounts belonging to the same or different users can be present on one PC at the same time. Based on this, a situation may arise when it is necessary to delete a certain local account.

It is worth mentioning that in Windows 10 there are local accounts and Microsoft accounts. The latter use email for login and allow you to work with a set of personal data regardless of hardware resources. That is, having such an account, you can easily work on one PC, and then continue on another, and at the same time all your settings and files will be saved.

Let's look at how you can delete local user data on Windows 10 using several in simple ways.

It is also worth noting that to delete users, regardless of the method, you must have administrator rights. This is a necessary condition.

Method 1: Control Panel

The easiest way to delete a local account is to use the standard tool, which can be opened through . So, for this you need to follow these steps.

Method 2: Command Line

A similar result can be achieved using the command line. It's more quick method, but it is not recommended for beginners to use, since the system in this case will not ask again whether to delete the user or not, will not offer to save his files, but will simply delete everything associated with a specific local account.

Method 3: Command Window

Another way to delete your login information. Similar to the command line, this method will permanently destroy your account, no questions asked.

Method 4: Computer Management Console

Method 5: Options

Obviously, there are plenty of methods for deleting local accounts. Therefore, if you need to carry out such a procedure, then simply choose the method that you like best. But you should always be strictly aware and understand that this operation entails the irrevocable destruction of login data and all user files.

Owners of the new operating system People often wonder how to delete a user in Windows 10 if the account is redundant or defective? The answer to this question lies in the specifics of working with user accounts. Microsoft developers have added a new design of system settings to the OS. Now, using a special section of Settings, you can delete a user in Windows 10 or temporarily disable a second account. This is a useful innovation, since the computer administrator may not delete the profile, but temporarily prohibit it from logging into the system. However, if disabling your profile on your computer is not an option for you, you can delete your user account in Windows 10.

How to delete a user account in Windows 10 through Settings?

To delete a Windows 10 user through Settings, you should follow a few simple steps:

• Click “Start”, “Settings” and select “Accounts”.

• A new window will open. In the left menu, select “Family and other users”. In the main window, select the account. The owner can be an administrator. In this case, a password may be required. Click “Delete”.

• A window will appear warning you about deleting a Windows user. Confirm the operation.

IMPORTANT! Together with the account, all desktop objects, “Documents”, “Video”, “Recordings”, “General” folders will be deleted. Therefore, if this data is valuable, it is worth copying it in advance.

How to delete a profile in Windows 10 via the command line?

To delete a user profile in the Windows 10 operating system, you should follow these steps:

• Right-click on the “Start” icon and select “Command Prompt (Admin).”

• The console will open. Enter the first command: net users.

• Next, the command to delete a profile will be as follows: net user Username /delete, where “Username” is the name of the account that needs to be deleted.

• We are waiting for the profile to be deleted.

Removing an account in Windows 10 through the Control Panel

If you need to delete a profile on Windows 10, we recommend using the Control Panel. To do this, perform the following steps:

• Click “Start” and select “Control Panel”. Then in the new window select “User Accounts”.

• If you have several accounts, then you should choose the one you want to delete. We carefully look at the username in Windows 10. Click “Delete account”.

• A window will appear asking you to save your profile data. We save at our discretion. Then click “Delete profile”.

• Profile has been deleted.

It is important to note that when deleting a profile through the Control Panel, you may be faced with the need to enter a password. If you don't know your password, you should use the following recommendations.

Deleting an account via the Run line

You can delete a profile on Windows 10 in just a few clicks via the Run line. To do this we do the following:

• Press “Win+R” and enter “netplwiz”.

• A new window will open. Select entry 2 and click “Delete”.

• After confirming the selected action, the other user will be deleted.

How to block one of the accounts on Windows 10?

If account 2 is rarely used, but you do not intend to delete it, you can simply block it. To do this, follow the instructions:

• Click “Start”, “Settings”, “Accounts” and select “Family and other users” in the left menu.

• Pull the slider down. Select the account that needs to be blocked and click “Block”.

• Then we confirm the selected action and click “Deny”.

Often several people work on one computer using the Windows operating system, and it is more convenient to differentiate their activities by creating different user accounts. If you need to delete such an entry, this can be done in several ways, but only under the computer administrator profile.

Sometimes the need to delete a Windows account arises due to a common error that results in the creation of two profiles with the same name. You may also need to remove the built-in administrator or user account.

In this article, we will look at the main ways to delete a user profile in Windows 10.

How to delete a user profile in Windows 10

If you have created a user profile in the Windows operating system, you can delete it in several simple ways, which will be discussed below.

Deleting a profile through settings

The easiest and most obvious way to delete a created profile in Windows is to use the settings. To do this you need to do the following:

By following the steps above, you can remove the user from your Windows 10 computer.

Removing a profile using the command line

The second way to delete a user created in the Windows operating system is to use the command line. This can be done from the Windows interface by running . After opening it, enter the command net users and press Enter to get information about all users on the system.

Once you have decided on the name of the user you want to delete, use the following command at the command line:

Net user Username /delete

Important: If the username contains punctuation marks or spaces, they must be entered as such when deleting.

It is worth noting that it is not recommended to delete administrator profiles or built-in system accounts through the command line.

Deleting a profile through the list of accounts

Another way to delete a computer user profile in Windows 10 is to use the Account Management utility. You need to do the following:

It is important to note that it is not possible to delete the built-in system profile through the account list. If you attempt to do this, an appropriate error will be generated.

Two identical users in Windows 10: how to remove one

A common error in the Windows 10 operating system is that two identical accounts are displayed when logging in. Often this problem occurs if attempts have been made to rename the user's main folder. You can solve the problem and delete one of the identical users in Windows 10 in the following way:

1. You need to call up the list of accounts by pressing Windows + R and activating the control userpasswords2 command in the “Run” line;
2. Next, select the user with whom you are having problems and enable a password request for him;
3. After this, save the settings and restart your computer.

After a reboot, the problem should disappear, after which you can disable the password request again.

How to remove built-in accounts in Windows 10

If for some reason you need to get rid of built-in accounts in Windows 10, you can do this through the command line. Built-in accounts cannot be deleted, but they can be disabled, which will prevent the user from seeing them in the list of available profiles when starting the computer and changing users. Disable built-in accounts in Windows 10 via the command line:

1. Run ;
2. Next enter the command